Ph: 02 96484977 
Production Series HDD Duplicator IT700
  • Item Code:IT700G
  • Product Name:Production Series HDD Duplicator IT700
  • IT-G Production Series are designed with factory production in mind, with the horizontal layout HDD can be load and unload with ease without standing up. The open platform design allow user to duplicate HDD or SSD without need of an adapter. The series also feature    
    more
Impeccable efficiency
 With up to 7.2 GB/ Min transferring bandwidth, it meets demand for small duplication to Computer system integrator, PC deployment. Each SATA interface is independent, and parallel to the controller. Unlike other duplicators or PC, this allows all targets of  HDD to duplicate at the same transfer rate up to 7.2 GB/ Min without reduction.  
Whole HDD Copy
 
Whole HDD Copy supports all kinds of partition formats.
 
Systems & Data Copy
 

At this mode, it identifies different HDD formats, such as FAT16/32, exFAT, NTFS, Linux(Ext2/Ext3/Ext4), and Mac(HFS, HFS+, HFSX. It will only copy the data and system contained area, without the need to copying entire hard drive. 

 
4 ways of Sanitization to prevent data leak out to the wrong hands
 

1.Quick Erase:Takes few seconds to complete

 
2.Full Erase: Erase the complete HDD
3.DoD Erase: Complies with the U.S. Department of Defense"s standard of erasing. 
 

4.Secure erase: A National Institute of Standards and Technology 800-88 accept technique for properly 
purging hard drives. This method is supported by almost all modern SATA HDD.

  
Device Compatibility
 Support GPT, MBR table format
Support Advanced format HDD, Up to 15TB above device
Supported OS: Linux, Unix, Windows, Macintosh, etc. are all supported.
 
Open Platform Design
Easier HDD Insertion & RemovalSwappable HDD Port Module: easy for replacement
and maintenance
Cable-free connection on HDD: supports 1.8"/2.5"/3.5” SATA HDD and SSDOptional adaptors are available for connection to external HDD for HDD Distribution.
Available Adaptor: 2.5", 3.5” IDE HDD, mSATA SSD, micro SATA, eSATA, iVDR
 
Real-Time PC Monitoring
 
PC-link is a perfect tool for MONITORING progress during duplication. It shows detailed information including writing speed, operation time, percentage of completion, etc. for each INDIVIDUAL ports. All available details is extracted and are able to be show on the PC screen for reporting. This allows pin pointing of errors & issues that occurred during the duplication process. And a common use of this tool is to identification slow writing HDDs (lagging), which can then be sorted out and labeled to prevent it slowing the entire process down.   
 
1. It’s able to monitor duplication status from PC while duplicators are connected to it.
2.shows and records the brand name, model, S/N, duplication time, result of every HDD from all the ports, the info of both sources HDD and target HDD are recorded. 
3.Slow R/W speed HDD detection: lagging HDD can be easily sorted, because user can see the duplication speed of every port by. “Event Log” 
4.To select a period of time in order to export part of the log data. Just one click, the data will be exported into .txt file and saved on PC. The date of export is the file name. (e.g. 20130308.txt) 
 
Log Report Management
 Records operation time, each port’s process details, including HDD’s model, capacity, S/N, result (pass, fail).
 Real-Time recording and viewing Log Report via PC-Link
 
 Log report .txt file can be generated via USB port and saved to USB device
  
 It can save up to 130,000 piece of log. One instruction onto one HDD is recorded as one piece of log. (e.g. duplication from 1 HDD to 21 targets will be recorded to 21 pieces of log) 
 
iSecuLog(Anti-Tampering Log Report)
 
To ensure the log reports integrity. This feature prevents possibility of tempering to the logs. Any falsification will be detected.  
 
Auto power control system
 
Removing a hard drive while the internal discs are still rotating can be disastrous to the drive. Some model of HDD fetures auto power off, and some don"t. This feature will prevent the damage by ensuring power is cut off from the duplicator once reading or writing process is stopped.   
Stand-Alone operation
 
There are two modes of operation, "Stand-Alone" and "PC-link operation". 
Stand Alone mode is a simple and user friendly interface which allow most of operation to be performed from the 4 buttons on the control panel. 
There is no expertise needed to operate the unit 

ModelIT700G
Target7
HDD InterfaceSATA
DisplayMonochrome LCD
Control Button4 push buttons ( Forward, Backward, OK, Esc)
Compatible Interface1.8"/2.5"/3.5” SATA HDD and SSD
Erase ModesQuick erase, full erase, DoD erase, Secure Erase
Duplication Modes1.Quick Copy (Systems & files) 2.All partition 3.Whole HDD 4.Percentage Copy
Support Format1.Systems & files: FAT,NTFS, Linux(ext2, ext3, ext4),GPT, Dynamic HDD 2.All partition/Whole HDD: All formats
Support LanguageEnglish, Japanese
Power Supply12V, 9A
HumidityOperating20%~80%
Storage5%~95%
TemperatureOperating5℃~45℃
Storage-20℃~85℃
SafetyCE, FCC, ROHS
Not found associated with the commodity products